Table of Contents
Advertisement
8.1 Honeywell Sola Control Programming/Configuration
The Honeywell control has been fully programmed and configured by the factory for most installations, in most installation
no adjustments or configurations are required, please note that optional items like, Outdoor reset, DHW production
and lead/lag systems require configuration, see separate instruction provide with the kits.
The Honeywell Sola has 3 different levels or access.
a. OEM – Factory = (factory only)
b. Service – (Service password or login = serial #)
c. User – (no password or login required)
A = OEM – Factory, access by authorized factory personnel only
B = Service – trained installers, operators (Access to configure optional items, lead/lag, etc.)
C = User – end user or operator (limited access)
In the configuration menu the User no password required has access to view all parameters but user cannot change
unless either a Service or OEM password is entered.
Login only required if specific parameters are required to be accessed, for example cascade or outdoor reset or DHW
production all other parameter shall not be changed without consent from the Manufacturer.
8.2 Programming Access:
Step 1:
from the Home screen touch the Sola control icon. From the overview screen touch the configure button in the bottom
left hand corner.
Absolute Boilers 750-900-1050
Absolute Boilers 750-900-1050
61
Advertisement
Table of Contents
