Absolute ABS-750 Installation And Operation Manual page 10

Absolute Boilers 750-900-1050
The standard control package allows for external On/Off, local-remote switch. The built in digital display shows normal
operating fault indications and allows actual and set values to be read and adjusted.
- The Sola controller has 4-20 MA, or mod-bus interface
- The the Sola controls cannot override the standard flame safety controls. External controls or commands can
modulate the boiler as required by the BMS.
- All Absolute boilers are fully test fired after assembly to ensure the boiler and controls comply with our strict quality
policy.
- The packaged boiler is constructed and approved according to the following standards:
▪ ANSI Z21.13 / CSA 4.9 - 2014
▪ UL 795
▪ CGA CAN1-3.1
▪ ASME Section IV
▪ CRN for each Canadian Province ( where applicable )
▪ Electrical according CSA 22.2 No 0.M91 & NEC/NFPA 70
▪ Gas Vent Category II & IV – Use vent type BH
▪ Consult factory for other certifications or qualifications.
▪ CSD-1 compliant
Absolute Boilers 750-900-1050
10