Tabletop To Wall Mount Installation; Handset Overview - VTech CS6519-2 User Manual

Tabletop to wall mount installation

The telephone comes ready for tabletop use. Follow the steps below to mount your
telephone on a wall.
1. Plug one end of the telephone line
cord into the TEL LINE jack at the
bottom of the telephone base and
the base power adapter into the
POWER jack.
3. Route the telephone line cord
through the hole on the wall mount
bracket and plug it into the telephone
wall jack. Route the power cord out
of the telephone base and plug it into
an electrical outlet not controlled by a
wall switch.

Handset overview

CHARGE light
On when the handset is charging.
/VOLUME
Review the directory when the
phone is not in use.
Increase the listening volume
during a call or message
playback.
Scroll up while in a menu, or in
the directory, call log or redial list.
Move the cursor to the right when
entering numbers or names.
REDIAL/PAUSE
Press repeatedly to review the
redial list.
Press and hold to insert a dialing
pause while entering numbers.
/FLASH
Make or answer a call.
Answer another incoming call
during a call.
1
Press repeatedly to add or
remove 1 in front of the call log
entry before dialing or saving it to
the directory.
Dialing keys
Enter numbers or characters.
TONE
Switch to tone dialing
temporarily during a call.
(speakerphone)
Make or answer a call using the
handset speakerphone.
During a call, press to switch
between the speakerphone and the
handset.
2. Position the telephone base against
the wall mount bracket as shown.
Insert the extended tabs marked B
on the wall mount bracket into the
slots marked B on the back of the
telephone base. Push the telephone
base down until it clicks securely.
4. Align the holes on the bracket with
the standard wall plate and slide the
bracket down until it locks securely.
Bundle the telephone line cord
and power adapter cord neatly
with twist ties.
CID /VOLUME
Review the call log when the phone
is not in use.
Decrease the listening volume
during a call or message playback.
Scroll down while in a menu, or in
the directory, call log or redial list.
Move the cursor to the left when
entering numbers or names.
MENU/SELECT
Show the menu.
While in a menu, press to select
an item, or save an entry or
setting.
OFF/CANCEL
Hang up a call.
Silence the ringer temporarily while
the handset is ringing.
Press and hold to erase the missed
call indicator while the phone is not
in use.
Press to return to the previous
menu, or press and hold to return
to idle mode, without making
changes.
# (pound key)
Press repeatedly to show other
dialing options when reviewing a
call log entry.
INT (intercom)
Start an intercom conversation or
transfer a call (for multi-handset
models only).
MUTE/DELETE
Mute the microphone during a call.
Delete digits or characters while
using the dialling keys.
Silence the ringer temporarily while
the handset is ringing.
Delete the displayed entry while in
the directory, call log or redial list.
3