Advertisement
Description
The panels are designed to be easily programmable allowing control of equipment by RS232 commands and
InfraRed. The system can be expanded to control equipment by contact closure using our Relay unit. More buttons
can be added using our Satellite Panels. The 2000series have two IR or RS232 ports, two dedicated RS232 ports
and one input port. Each button has LED feedback. Four, Six, Eight, Twelve, Sixteen, Twenty and TwentyFour button
panels are available. The panels are programmed using the DCS software. This is found on our Website
www.amx.com
Button Labelling for 8 Button Satellite Panels
Satellite panels can be configured for (1 to 8), (9 to 16) or (17 to 24).
The buttons are numbered as above for programming purposes. When using the Four button version buttons 2/3/6/7,
(10/11/14/15), (18/19/22/23) only are used and when using the Six-button panel only 1/2/4/5/6/8, (9/10/12/13/14/16),
(17,18,20,21,22,24) are used.
Button Labelling for 16 Button Satellite Panel
Button1
Button2
Button5
Button6
16 Button panels are always numbered as above.
A range of pre-labelled buttons are available or button can be custom labelled by printing on A4 acetate.
To fit the labels carefully remove the lens cap and insert the label into the lens cap then refit the lens.
Button1/9/17
Button2/10/18
Button5/13/21
Button6/14/22
Button3
Button4
Button7
Button8
Button3/11/19
Button4/12/20
Button7/15/23
Button8/16/24
Button15
Button16
Button13
Button12
Button9
Button10
Button14
Button11
Advertisement
