Replacing the outer foil and the inner blade
ES-EL9A/ES-EL7A
We recommend replacing the outer foil [
year and the inner blade [
Remove the outer foil of the shaver head [
when replacing it.
Replacing the outer foil
1. While pushing the outer foil gently with the
fingers, use a fingernail to release the plastic
panel ( ) on the blade from the hooks ( ) on the
inside of the frame.
2. The new outer foil should be slightly bent and
pushed in until it is hooked in the frame.
Replacing the inner blade
1. Remove the inner blade by
holding it at both ends and
pulling straight away from the
shaver head.
2. Insert the inner blade by holding
it at both ends and press
downward.
4] every
F
8] every two years.
F
] only
F
Replacing the file
The file lifetime is approximately 1 year (assuming a
single use every 2 weeks with approximately 10
minutes per use). We recommend replacing the file
about once a year.
1. Press down with your finger and release the file.
2. Align the
shaped part with the
and press down.
Replacing the sonic scrub brush
ES-EL9A
Sonic scrub brush
Once a year (assuming 3 minutes
(Scrub brush)
use per week)
• See "Removing and attaching the sonic scrub brush"
(page 14) for details regarding replacement of the
brush.
ES-EL9A
mark side
21