Before Using For The First Time; Initial Use; Cleaning The Cooking Compartment; Cleaning The Accessories - Siemens CN838GR 1B Series Instruction Manual

Before using for the first time

en
KBefore using for the first
time
Before you can use your new appliance, you must
t h e f i r s t t i m e B e f o r e u s i n g f o r
make some settings. You must also clean the cooking
compartment and accessories.
Before using for the first time
Before using the appliance for the first time, enquire
about the water hardness of your tap water from your
water supplier.
So that the appliance can reliably remind you to
decalcify it when required, you must correctly set your
water hardness range.
Caution!
The appliance may become damaged due to the use of
unsuitable liquids.
Do not use distilled water, highly chlorinated tap water
(>40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or non-
carbonated mineral water.
Notes
If your water is very hard, we recommend that you
■
use softened water.
If you only use softened water, you can set the water
■
hardness range to "softened" in this case.
If you use mineral water, set the water hardness
■
range to "4 very hard".
If you use mineral water, you must only use non-
■
carbonated mineral water.
Water hardness range
0
1 (up to 1.3 mmol/l)
2 (1.3 - 2.5 mmol/l)
3 (2.5 - 3.8 mmol/l)
4 (above 3.8 mmol/l)

Initial use

After connecting the appliance to the power or following
a power cut, the settings for initial use are shown in the
display.
You can change these settings at any time in the
Note:
basic settings. ~ "Basic settings" on page 18
Setting the language
German is the preset language.
Use the rotary selector to select the required
1.
language.
Touch the arrow.
Æ
2.
The next setting appears.
14
Setting
0 softened
1 soft
2 medium
3 hard
4 very hard
Setting the clock
The time starts at 12:00.
Use the rotary selector to set the current time.
1.
Touch the arrow
Æ
2.
Setting the date
The default date is 1.1.2014.
Always touch the
Æ
1.
setting.
Use the rotary selector to set the current day, month
2.
and year.
Setting the water hardness
The default water hardness setting is "very hard".
Change this setting if your water is softer. You can ask
your water supplier about the water hardness level.
Set the hardness using the rotary selector.
1.
Touch the arrow.
Æ
2.
A message appears on the display confirming that
the initial use has been completed.

Cleaning the cooking compartment

To remove the new-appliance smell, heat up the
cooking compartment when it is empty and with the
oven door closed.
Remove the accessories from the cooking
1.
compartment.
Remove leftover packaging, such as polystyrene
2.
pellets, from the cooking compartment.
Before heating the appliance, wipe the smooth
3.
surfaces in the cooking compartment with a soft, wet
cloth.
Press the On/Off button to switch on the appliance.
4.
Fill the water tank.
5.
Set the type of heating, temperature and added
6.
steam, then start the appliance operation.
Settings
Type of heating
% Top/bottom heating with added steam
("low" intensity)
Temperature 240 °C
Duration 1 hour
Keep the kitchen ventilated while the appliance is
7.
heating up.
Use the On/Off touch button to switch off the
8.
appliance after the indicated time.
Wait until the cooking compartment has cooled
9.
down.
Clean the smooth surfaces with soapy water and a
10.
dish cloth.
Empty the water tank and dry the cooking
11.
compartment.

Cleaning the accessories

Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
arrow to move to the next