Axis P3265-LVE-3 User Manual page 39

AXIS P3265-LVE-3 License Plate Verifier Kit
The device interface
Remove distortion
of image height and resolution. Bloat means that image height and resolution are kept at the expense of image width.
Electronic image stabilization (EIS)
to use EIS in environments where the device is mounted in an exposed location and subject to vibrations due to, for example,
wind or passing traffic.
Focal length
of view, while a lower value leads to a lower magnification and a wider angle of view.
Stabilizer margin
stabilize. If the product is mounted in an environment with a lot of vibration, move the slider towards Max. As a result, a smaller
scene is captured. If the environment has less vibration, move the slider towards Min.
Straighten image
functionality is useful when it's not possible to mount the camera exactly level. Ideally, straighten the image during installation.
: Click to show a supporting grid in the image.
: Click to hide the grid.
Image
Appearance
: Use the slider to adjust the correction level. Pucker means that the image width is kept at the expense
: Turn on to get a smoother and steadier image with less blur. We recommend you
: Use the slider to adjust the focal length. A higher value leads to higher magnification and a narrower angle
: Use the slider to adjust the size of the stabilizer margin, which determines the level of vibration to
: Turn on and use the slider to straighten the image horizontally by rotating and cropping it digitally. The
The image before and after it has been straightened.
39