Intex CLEARVIEW PRISM FRAME 126730GN Owner's Manual page 9

POOL SETUP (continued)
• Use a large mason rule (aluminum or wood)
and a level. Level out the ground by cutting
rectangles (or squares), locating this rule in
the selected and cleaned area
A
(see drawing 2.2).
4. Finishing
• On the cleaned and leveled ground, spread a light coat of sieved dirt to a maximum depth of 1/2 inch
(1 cm). Spray water and compact it (with a garden roller). Double check and ensure it is well leveled.
The ground has to be perfectly level in order to proceed further.
5. Patio block installation
• Purchase 16 pieces of patio block for 16' pool.
18" x 18" x 2". Mark the area where the blocks will be buried (see drawing 3.1), then remove 2" (5.08 cm)
of soil from the marked area (see drawing 3.2).
For 16' (488 cm) pool, where
A = 8'9" (266.7 cm) = Radius of grass area need to be removed and leveled.
B = 3'5" (104.1 cm) = Distance between each Patio Block.
B
A
• The top of blocks should be flush with soil surface and level with the area surface and with all patio
blocks around entire pool (see drawing 3.3).
SAVE THESE INSTRUCTIONS
(117IO) CLEARVIEW PRISM FRAME™ PREMIUM POOL ENGLISH 7.5" X 10.3" PANTONE 295U 12/14/2020
The minimum dimensions of each block should be
3.1
English
117A
2.2
3.2
2" (5.08 cm)
3.3
Page 8