Before Using The Appliance For The First Time; Cleaning The Appliance; Heating Up The Teppan Yaki; Operating The Appliance - Gaggenau Vario 400 Series Use And Care Manual

en-us

Before using the appliance for the first time

Before using the appliance for the first
time
B e f o r e u s i n g t h e a p p l i a n c e f o r t h e f i r s t t i m e
I n this section, you can find out what you must do
before using your appliance to prepare food for the first
time. Read the safety information before you start.

Cleaning the appliance

Before using the appliance for the first time, clean it
thoroughly with lukewarm soapy water.

Heating up the Teppan Yaki

To eliminate the new appliance smell, heat up the Teppan
Yaki without anything on it for a few minutes at 420° F.
10

Operating the appliance

T urning on
O p e r a t i n g t h e a p p l i a n c e
1.
Push in the temperature control knob and turn it
clockwise or anti-clockwise to the required
temperature between 240 - 480° F.
The illuminated ring behind the temperature control
knob flashes while the appliance is heating up. The
illuminated ring lights up continuously when the set
temperature has been reached.
2.
If you do not want to cook on the entire heating zone,
you can use the left-hand control knob to select only
the front or only the rear area. Push in the left-hand
control knob and select the required heating zone Q
or select R.
3.
After it heats up, use the spatula or a heat-resistant
brush (e.g. silicone brush) to spread a little oil or fat
evenly over the frying surface.
4.
Place the food directly onto the frying surface without
a pot or pan.
5.
Use the spatula supplied to turn the food.