Advertisement
Quick Links
The NP-FW50 Cradle A allows connecting an additional NP-FW50
battery to the camera, thereby providing extended battery life. The
cradle unit connects to the camera Micro USB port and can be
mounted on the camera hot-shoe mount for a secure position inside
the housing. For compatibility information, please visit
www.fantasea.com
IMPORTANT NOTICES
* Images provided in this instruction manual feature the Sony a6500 camera. However, the NP-FW50 Cradle A can be
used with other cameras that are equipped with a Micro USB port and enable operation when connected to a
charger.
** Images provided in this instruction manual feature the Fantasea FA6500 Housing. However, the NP-FW50 Cradle
A can be used with other housing models offering sufficient space to accommodate the cradle, either when mounted
on the camera hot-shoe or secured elsewhere in the housing.
*** The NP-FW50 Cradle A blocks the camera hot-shoe connection if mounted on the camera hot-shoe. Depending
on the housing model, the cradle can be secured elsewhere and without blocking the camera hot-shoe if sufficient
space is available.
**** NP-FW50 battery not included.
SPECIFICATIONS
Material: Polycarbonate
Main unit dimensions (L x W x H): 55 x 37 x 25 mm / 2.16 x 1.46 x 0.98 inch
Weight: 20 g / 0.7 oz
Manufacturer's warranty
INSTRUCTIONS FOR USE
1.
Install a fully charged NP-FW50 battery inside the cradle by gently sliding it in. Make sure the battery is
installed with the electrical socket opposite the cradle plug (Fig.1).
2.
Gently push the battery all the way in, until the cradle plug is fully inserted inside the battery electrical
socket (Fig.2). Do not use any force in order to avoid distortion of the plug.
1
Fantasea Line
NP-FW50 Cradle A
Instruction Manual
Fig.1
(Cat. No. 6581)
NP-FW50 Cradle A Instruction Manual 20171201
Fig.2
Advertisement
Related Manuals for Fantasea Line 6581
Summary of Contents for Fantasea Line 6581
- Page 1 Fantasea Line NP-FW50 Cradle A (Cat. No. 6581) Instruction Manual The NP-FW50 Cradle A allows connecting an additional NP-FW50 battery to the camera, thereby providing extended battery life. The cradle unit connects to the camera Micro USB port and can be mounted on the camera hot-shoe mount for a secure position inside the housing.
- Page 2 To make sure that the battery has been properly installed inside the cradle, turn the cradle on using the power switch. If a charged battery has been properly installed, the indicator light will turn on (Fig.3). If possible, it is recommended to mount the cradle on the camera hot-shoe in order to secure it within a fixed position and to ensure all camera and housing functions are Fig.3...
- Page 3 Turn the camera on and look for a charging icon or any other indication that usually appears on your camera when connected to a charger (see example on Fig.9). Note that occasionally, such icons disappear after a few seconds and should appear again if depressing the shutter release halfway. Install the camera inside the camera housing following the instructions provided with the housing (Fig.10).
- Page 4 FANTASEA PRODUCT CONSUMER LIMITED WARRANTY “Fantasea” warrants this Fantasea Line branded product against defects in materials and workmanship under reasonable use for a period of ONE (1) YEAR, (two years, where required by law as determined by the origin of the authorized dealer).