Home Decorators Collection HDVB6001 Assembly Instructions Manual page 8

Assembly (continued)
5
Installing support bars
□ Keep the support bars in the position, then drill pilot
holes on the wall through the support bar (D) at the
marked positions using ø1/8" (2.5mm) drill bit.
D
6
ø1/8"
2.5mm
8
Installing support bars
□ Except for the holes that are over the stud, drill in
the exisiting holes on the wall using ø5/16" (8mm)
drill bit and insert the wall anchors (E) into the
holes using a rubber mallet until the wall anchors
are flush with the wall.
HOMEDEPOT.COM/HOMEDEPOT.CA/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
E
ø5/16"
8mm