Westpoint WTNF-09113.RC Installation Manual page 3

 Unplug the appliance before any cleaning operation. Use only non-corrosive or non-flammable household
products. Any projection of water or steam is to be avoided to avoid the risk of electrocution or injury.
 If your device is equipped with lighting, disconnect the device from the electrical source before changing the
bulb (or neon, etc.) to avoid any accident.
 To avoid any risk of damaging the appliance, transport it in its position of use, equipped with its transport
blocks (depending on the model). When unpacking it, and to prevent any risk of suffocation or accident, it is
essential to keep the packaging materials out of the reach of children.
 The electrical components (power cord, plug, compressor) must be replaced by an authorized technician
service or by a specialized electrician.
 Do not touch the device with wet or damp hands.

Place and use the device on a flat, horizontal and stable surface.
 If you have to use an extension cord, make sure that it is in good condition, plug to a ground connection and
that the conductor section is at least equal to the power cord, supplied with the appliance.
 The warranty does not include the presence & damages due to any foreign bodies (Lizards, Cockroaches, flying
or crawling insects, ants, rats, mice...) in the unit.
 When it will no longer work, do not throw the device in with household waste but rather place it in a place
provided for this purpose so that it can be recycled. By doing this you will help protect the environment.
SAFETY RULES AND RECOMMENDATIONS BEFORE AND FOR USE

This appliance is not intended to heat the room in which it is installed, but to prevent losses due to the outside.
 The device must only be used in dry and dust-free environments.
 The device must not be used in environments where corrosive or chemically aggressive gases or vapors are
present.
 The device is intended for use in ambient temperatures ranging from 0 ° C to 40 ° C.
 All electrical wiring and connections must be made by a qualified electrician.
 Only a qualified technician can carry out the work of installing the device.

The device must be placed in a sheltered location, fixed horizontally to the wall or ceiling.
 Leave a minimum distance of 20 cm between the suction grille and any object and obstacle.
 Protect the device against damage and ingress of dust, cement, etc. throughout the installation.

Do not place the air curtain in the immediate vicinity of a bath, shower, or swimming pool.
 Make sure that the structure supporting the device is compatible with the weight of the device.
 Check that the dimensions below are respected:
- The width of the device must be at least the same as that of the door opening
- Mount the device as close as possible to the door opening
- Mount the appliance as close as possible to the top of the door
 ATTENTION: The minimum mounting height (dimension h) is 1.8 m.
 The device must be placed at a minimum distance of 25 mm from the ceiling (dimension x).
 If the appliance is installed on the ceiling: Make sure that air can enter the appliance freely by passing over it.
 RISK OF BURNS: Do not touch or place your hands near the heating element while it is in operation to avoid
being burned.

CAUTION: Keep objects, substances or materials, including clothing, curtains and all combustible materials
(non-exhaustive list) at least one meter from the air curtain.
 Do not insert, attempt to insert or block any object in this unit, which could cause burns, fire, electric shock ...
to people and property.
 Do not cover or store any object, substance or material on the air curtain when it is in operation.
 Make sure that the air intake holes are not blocked.
 Do not use the air curtain outdoors.
 Do not immerse the air curtain with water and / or any other liquid.
 NEVER attempt to install, maintain or repair the device if you do not have the required qualifications.
 CAUTION: Do not introduce objects into the suction and blowing openings.
 CAUTION: Do not block the entry or exit points of the device.