Table of Contents
Advertisement
36
AC coupling:
Frequency response (-3 dB): 25 kHz on the ±10 V range
DC drift:
CMRR:
Input crosstalk:
Input noise:
Pod Connectors
General features:
Supply voltage:
Maximum current:
Communications:
Signal input:
Connector type:
Sampling
ADC resolution:
Linearity error:
Maximum sampling rates:
Analog Outputs
Number of outputs:
Output configuration:
ADC resolution:
Maximum output current:
DC or 0.15 Hz (software-selectable)
Software corrected
100 dB @ 100 Hz (differential mode, 100 mV –
2 mV range)
75 dB minimum
< 350 μV
referred to input on the ±10V
rms
range
2
Combined power, I
C and single-ended or
differential analog input on one connector,
supports SmartPod transducers, etc.
±5 V regulated
50 mA per pod port
2
2-wire I
C
Positive and negative analog inputs
8-pin DIN
16 bits (312.5 μV resolution on the ±10 V
range)
±2.5 LSB
200 kHz using one or two input;
100 kHz using three or four inputs;
40 kHz using five to eight inputs;
20 kHz using nine to sixteen inputs.
2
Single-ended (outputs can be used as one
differential output)
16 bits (312.5 μV resolution on the ±10 V
range)
±50 mA
PowerLab Owner's Guide
Advertisement
Table of Contents
