Westinghouse WVEP615 User Manual page 25

Pyrolytic Cleaning Operation
1. Turn on the oven.
Select: Menu/ Cleaning/ Cleaning. Press OK
2.
3. Put the baking tray into the cavity base
underneath the drain pipe to collect water from
the water tank. Press OK to start the water tank
emptying.
4. When the water emptying ends, remove the
baking tray. Wipe the oven cavity and the inner
glass door with a soft cloth. Press OK.
5. Press
or to select the cleaning mode. Press
Option Cleaning mode
Quick Light cleaning
Normal Normal cleaning
Intense Thorough cleaning
When the cleaning starts, the oven door is locked
and the lamp is off. To stop the cleaning before it is
TIPS & INFORMATION
completed, turn off the oven. The oven stays locked
until it is cold.
Pyrolytic cleaning (all other models)
Before carrying out the Pyrolytic function
1. All accessories must be removed from the oven,
including shelves, trays and side racks.
2. Clean large deposits, spills or grease from the
oven cavity.
3. Ensure the cavity well is free of limestone scaling
(refer to cleaning the cavity well chapter)
4. Choose the Pyrolytic cleaning cycle from
the following:
soiling
light clean
normal clean
NOTE: Duration includes heat-up time, excluding
cool-down time.
Light clean
This is an energy saving cycle that can be used on a
regular basis if the oven is lightly soiled. Possibly after
every 2nd or 3rd roast.
Normal clean
Use this as the regular cycle about once every
2-3 months.
Duration
1 hr 30 mins
2 hrs
2 hrs 30 mins
duration
1hr 30mins
2hr 30mins
Pyrolytic Cleaning Operation
The pyrolytic cleaning function can be selected by turning
the function selector switch clockwise to the pyrolytic
position. Use or to toggle between a pyrolytic
cleaning time of 1:30 hours or 2:30 hours. The pyrolytic
function can be stopped at any time by turning the
function selector counterclockwise to the OFF position.
.
IMPORTANT
During Pyrolytic cleaning the door will automatically
lock when the temperature in the oven approaches
300˚C. will appear on the display. During the
pyrolytic cleaning cycle there may be some burn off
odours. It is advised to keep the room well ventilated
during this cycle.
When the pyrolytic cleaning function is on, it is advisable
not to use a cooktop if it is fitted above the oven. This
could cause overheating and damage to both appliances.
The door will only unlock when the oven has cooled to a
safe temperature. Turning the function off will not unlock
the door. This will only happen when safe temperature
is reached.
NOTE: The cooling fan will operate at an increased speed
for Pyrolytic cleaning and will continue to run until the
oven has cooled down. This is normal. It is recommended
to clean the oven regularly to keep it in its best condition.
After Pyrolytic cleaning
After cool-down, wipe the ash out of the oven with a soft
damp cloth and warm water.
To restore the enamel shine to more difficult areas, use a
damp cloth with vinegar and detergent.
CAUTION
Do not turn off the mains power supply to the
oven during the pyrolytic cycle. This could
damage the appliance.
This knob cannot be
turned anticlockwise
from off position
25
USING YOUR OVEN