Table of Contents
Advertisement
A/V Setting
If
A/V Setting
installation menu are applied whenever turn on power.
• Following Parameters are applied to basic.
- Picture section - PSM mode, Picture Data (Contrast, Brightness, Color, Sharpness, Tint)
- Sound section - SSM mode, Sound Data (Balance, Equalizer Data)
- AVL (Auto Volume Level) and Language, Teletext language, ARC Data.
• Except these, other parameters are applied differently according to the TV-Set.
Aspect Ratio
The aspect ratio determines the default aspect ratio that the set returns to on power up.
• The modes are as follows:
- Aspect ratio =
- Aspect ratio =
- Aspect ratio =
- Aspect ratio =
• If enabled, upon power up the television resets the aspect ratio to the specified state
regardless of how the user has previously changed the aspect ratio.
Aux Source Setting
The Auxiliary (Input) Source Setting feature will enable or disable for each external input. When
Source Setting
is set to
• Available Input Source List
• Decide whether selected
• User cannot disable the current input's
Factory Reset
Factory reset returns all the parameters to the default settings.
1 Press Enter key to proceed factory reset. and confirmation message window will be shown.
2 When select YES, all television settings except UTT value should write to the default settings.
10
is changed from
Off
to On, parameters that are set before entering
"Disable
(0)" stays at previous state, same as consumer model.
"Original
(1)"
"4:3
ratio (2)"
"16:9
ratio (3)"
On
(Work), the RJP or HDMI-CEC / HTNG will not operate
Input Source
is set to
Aux Source
On
(Enable) or
Off
(Disable).
Setting.
Aux
Advertisement
Table of Contents
