Advertisement
CARE AND MAINTENANCE
FILTER INDICATOR
RESET
This is a reminder to perform the maintenance described
below. After performing maintenance, reset the Filter
Indicator.
CARE INDEX
1
2
4
Place
1
Water Tank
2
3
Sensors
Humidifying Filter
4
Humidifying Tray
HEPA Filter
5
Deodorizing Filter
y
more
3 sec.
3
5
2
Ref.
E-11
E-12
E-13
E-11
WATER TANK
Rinse the inside
with water.
NOTE
How to clean hard to remove dirt.
Tank Cap
Toothbrush
UNIT / BACK PANEL
Wipe with a dry, soft cloth.
Sensors
Back Panel
Remove the dust gently with
a cleaning tool such as a
vacuum cleaner.
NOTE
How to clean hard to remove dirt.
Back Panel
1. Add a small amount of kitchen
detergent to water and soak for
about 10 minutes.
CAUTION
Do not apply excessive pressure
when scrubbing the back panel.
clean water.
wellventilated area.
Sensor Filter
Sensor Filter
it with water and dry it thoroughly.
Clean the inside of
the Water Tank with
a soft sponge and
the Tank Cap with
a cotton swab or
toothbrush.
Advertisement
