Table of Contents
Advertisement
Dynamic ESA range of
4
adjustment
Dynamic ESA enables you
72
to adjust your motorcycle's
suspension to suit the load and
the road conditions.
Dynamic ESA uses a ride height
sensor to detect movements
in the chassis and suspension
and responds by adjusting the
damper valves. The chassis and
suspension will thus be adapted
z
to the characteristics of the ter-
rain.
You can set the damping to a
harder (DYNAMIC) setting than
the basic setting (ROAD).
Dynamic ESA calibrates itself at
regular intervals when station-
ary with the engine running to
ensure the correct operating
principle of the system. Dur-
ing this calibration, chassis and
suspension adjustment is not
possible.
Adjusting the chassis and
suspension
Switching on ignition (
In the multifunction display the
spring preload is shown in area 1
and the damping in area 2.
48).
To adjust damping:
Repeatedly press button 1 until
the setting you want to use
appears on the display.
NOTICE
You can adjust the damping
characteristic while the motor-
cycle is on the move.
The following settings are avail-
able:
ROAD
: Comfortable damping
characteristic
DYNAMIC
characteristic
: Sporty damping
Advertisement
Table of Contents
