Table of Contents
Advertisement
CLEAN BUTTON
To begin cleaning with your Shark ION
ROBOT™, press the CLEAN button.
Press button again to stop.
DOCK BUTTON
Press DOCK button to stop cleaning and
send the unit back to the charging dock.
SPOT BUTTON
For thorough cleaning of an area of
concentrated dust or debris, press the
SPOT button.
BATTERY CHARGE INDICATOR LIGHTS
The indicator lights display the amount of
charge remaining in the battery. See page
10 for more details.
!
Clean
Dock
Replace
!
Clean
Dock
Spot
Spot
"!" ERROR INDICATOR
When a blockage or a filter problem
occurs, the "!" error indicator light will
illuminate. Clear any blockages and clean
filters. Remove dust bin and make sure
nothing is blocking suction. See page 21
for a full list of error codes.
WI-FI INDICATOR
Illuminates blue when unit is connected
to Wi-Fi. If the icon illuminates red, the
connection has been lost. When the icon
is flashing blue, the robot is in setup mode.
When the icon is off, the robot has not been
set up to connect to the Internet.
s h a r kc l e a n . c o m
8
Advertisement
Table of Contents
