System Requirements - Sony Cyber-Shot DSC-RX100M3 Instruction Manual

x

System requirements

You can find the system requirements for the software at the following URL:
www.sony.net/pcenv/
x Installing PlayMemories Home on a computer
1
Using the Internet browser on your computer, go to the
following URL, and then install PlayMemories Home.
www.sony.net/pm/
• For details on PlayMemories Home, refer to the following
PlayMemories Home support page (English only):
http://www.sony.co.jp/pmh-se/
• When installation is complete, PlayMemories Home starts.
2
Connect the camera to your computer using the micro
USB cable (supplied).
• New functions may be installed in PlayMemories Home. Connect the
camera to your computer even if PlayMemories Home is already
installed on your computer.
Notes
• Do not disconnect the micro USB cable (supplied) from the camera while the
operating screen or the accessing screen is displayed. Doing so may damage the
data.
• To disconnect the camera from the computer, click
[Eject PMHOME].
GB
30
on the tasktray, then click