Assigning A Color To A Contacts Entry; Selecting A Ringer For An Entry - Sanyo PLS-200 User Manual

Assigning a Color to a Contacts Entry

You can assign a color to a Contacts entry. The color is displayed
when the entry calls you.
To assign a color for an entry:
1.
Press the navigation key right.
2.
Select the entry for which you want to assign the color and
press
3. Press Options (right softkey), highlight Edit, and press
you are selecting email/web address, press Edit (right softkey).
4. Scroll down to Picture ID and press
5.
Select your desired color by using the navigation key and
press
6. Press Save (left softkey) to save the color type.

Selecting a Ringer for an Entry

You can assign a ringer type to a Contacts entry so you can identify
the caller by the ringer type. (See "Ringer Types" on page 35.)
To select a ringer type for an entry:
1.
Press the navigation key right.
2.
Select the entry for which you want to set the incoming ringer
and press
3. Press Options (right softkey), highlight Edit, and press
you are selecting email/web address, press Edit (right softkey).
4. Scroll down to Ringer and press
5.
Scroll to your desired ringer and press
a ringer type, a sample ringer will sound.)
6. Press Save (left softkey) to save the ringer type.
Section 2G: Using the Contacts Directory
.
, then press OK (left softkey) to assign.
.
.
.
. (When you highlight
or if
or if
83