Specifications; Serial Number Plate - HIGHER SciCan HYDRIM M2 Operator's Manual

10. Specifications

Height, freestanding: 850mm
Height, built-in: 830mm
Width: 600 mm
Depth: 600 mm
Depth with door open: 1200 mm
Weight: 80 kg
Running Noise: 60 dB(A)
Hot and cold water connections: G 3/4"
Inlet water pressure: 2-5 bar
Incoming hot water temperature: 60°- 84°C
Drain: 3/4"
Water softener: 1.0 kg salt capacity
Electrical Connection: 220-240 V 50 Hz 16 A
Equipment pollution degree: Pollution Degree 2
Equipment installation category: Installation category II
Maximum relative humidity: 80% for temp up to 31°C
Operating temperature range: -5°C to 40°C
Max. altitude: 2000m
Mains supply: + / -10% of nominal
Required clearance: 10mm on either side, at the top and at the rear of the unit.

11. Serial Number Plate

When ordering supplies, spare parts or requesting service, please ensure that
the information contained on the serial number plate is available (Model number,
serial number etc.).
The serial number plate is located at the bottom left on the rear panel of the
Hydrim M2 unit. A small label is located on the left hand side of the chemical door.
50% for temp up to 40°C
61