Technician Menu - HIGHER SciCan HYDRIM M2 Operator's Manual

5. Instructions for Use
User Menu
Set Drying Time
Error History
Cycle Count
User Menu
Set Drying Time
Error History
Cycle Count

5.8 Technician Menu

Technician
This menu is only available to authorised technicians.
Error History
Printout 1 Page 1/2
HYDRIM M2
Software Rev. 3.00
16:32 26/01/2007
SN 40068001
Cycle Number: 000032
START 26 C 00:00:02
TEST 19C 00:00:43
Cycle Count
2
44
User Menu – Error History
This allows the user to see the last
three errors and the last cycle complet-
ed, whether or not there was an error.
Press the down arrow to move to the
next page / error. If the Hydrim has a
printer, press the printer icon to obtain
a print-out of the error history. Press
the X in the lower left hand corner to
clear the error history. Press the back
arrow to move to the previous menu.
User Menu – Cycle Count
This allows the user to see how many
cycles have been run on the Hydrim.
Touch cycle count and the number of
cycles (completed and aborted) will
be displayed. This cannot be reset.
Touch the back arrow to return to the
previous menu.