Date And Time Setting - Sanyo Xacti VPC-S120 User Manual

DATE AND TIME SETTING

The camera will record the date and time an image or audio recording is
taken so that you can display them during playback. Therefore, before
capturing images, make sure the correct date and time are set.
hTo correct the date and time setting, please see under HINT on page 17.
Example: To set the clock to 7:30 p.m. on December 24, 2010
1
Turn on the camera (page 13), and
press the SET button.
h The Clock Set Screen appears.
h Follow the procedures below to
enable or disable the date display
during playback, to set the display
format for the date, and to set the
date and time.
h To display the Recording or
Playback Screen, press the
MENU button 2 times.
2
Set the date.
1 Select "DATE".
2 Press the SET button.
h The Set Date Screen appears.
3 Set the date to "2010/12/24".
h The date is set in the following
order: Set the year → Set the
month → Set the day.
h Press the [l] or [m] button to
select year, month or day.
Press the [n] or [o] button to
increase or decrease the
number.
4 Press the SET button.
15
English
CLOCK SET
2010/01/01
DATE
TIME 00:00
DISP Y/M/D
OK
SET
CLOCK SET
DATE 2010/12/24
OK
SET