Preparing The Camera - Sanyo Xacti VPC-CA102 Manual For Basic Operation

SHOOT, PLAY BACK AND SAVE

Preparing the camera

1
Insert the battery pack.
Battery cover lock
1 Push the battery cover lock to
the right to release it.
5 Push the battery cover lock to the
left to lock it.
The colored label is visible when
the battery cover lock is not
completely closed. Be sure to close
the lock completely so that the
colored label is not visible.
Colored label
About saving your recorded data
h If you wish to use an SD Memory Card, refer to page 9 to install the
card in the camera.
h An SD Memory Card is not included with your camera. Please
purchase a commercially sold card.
h This camera has an internal memory, so you can shoot and record
without an SD Memory Card installed.
2 Open
Battery
cover
3 Insert the battery pack while
matching the connector markings.
Battery pack
Connector
markings
4 Close
iv
English