Philips 32PF9968/10 Service Manual page 10

EN 10 4. LC7.2E PA
4.3.7 Power Supply Board
The PSU belongs to the PDP panel. Please refer to the PDP
repair manual for more info (info on front page).
4.3.8 Small Signal Board [B]
1. Unplug all connectors. Carefully unplug the LVDS
connector as it is very fragile.
2. Remove the T10 tapping screws [1].
3. Remove the T10 parker screws [2].
4. Take out the panel.
Figure 4-10 Small Signal Board -1-
1
Figure 4-11 Small Signal Board -2-
4.3.9 PDP Panel
1. Refer to next figures.
2. Remove the bottom "speaker cover", as earlier described.
3. Unplug mains cable from PDP Power Supply Unit [1].
4. Unplug all connectors to/from the panels inside the "SSB
tray". Pay attention to the LVDS connector.
5. Remove screws [2], and remove the metal "SSB tray" (incl.
panels) from the set.
6. You now view the PDP boards, as shown in fig. "PDP panel
[2/3]".
7. Remove fixation screws [3] and lift the complete PDP (incl.
the boards and wiring) by means of the mounting brackets
[4] from the set. Note: Remove these brackets [4] before
returning the defective PDP.
All manuals and user guides at all-guides.com
Mechanical Instructions
1
H_16960_010.eps
2 2
1
H_16960_011.eps
030407
030407
1
2
Figure 4-12 PDP panel [1/3]
Figure 4-13 PDP panel [2/3]
4
3
Figure 4-14 PDP panel [3/3]
H_16960_012.eps
060407
H_17000_009.eps
260207
4
H_17000_015.eps
280207