MSI Z170A SLI Manual page 52

Table of Contents

Advertisement

Ring Ratio [Auto]
f
Sets the ring ratio. The valid value range depends on the installed CPU.
Adjusted Ring Frequency
f
Shows the adjusted Ring frequency. Read-only.
Misc Setting*
f
Press Enter, + or - key to open or close the following 3 items related to CPU features.
fEIST [Enabled]*
Enables or disables the Enhanced Intel
[Enabled]
[Disabled]
fIntel Turbo Boost [Enabled]*
Enables or disables the Intel
CPU supports this function.
[Enabled]
[Disabled]
fEnhanced Turbo [Auto]
Enables or disables Enhanced Turbo function for all CPU cores to boost CPU
performance.
[Auto]
[Enabled]
[Disabled]
CPU Base Clock (MHz) [Default]
f
Sets the CPU Base clock. You may overclock the CPU by adjusting this value. Please
note that overclocking behavior and stability is not guaranteed. This item appears
when a CPU that support this function is installed.
CPU Base Clock Apply Mode [Auto]*
f
Sets the applying mode for adjusted CPU base clock.
[Auto]
This setting will be configured automatically by BIOS.
[Next Boot]
CPU will run the adjusted CPU base clock at next boot.
[Immediate] CPU runs the adjusted CPU base clock immediately.
[During Boot] CPU will run the adjusted CPU base clock during boot.
52
BIOS Setup
Enables the EIST to adjust CPU voltage and core frequency
dynamically. It can decrease average power consumption and
average heat production.
Disables EIST.
Turbo Boost. This item appears when the installed
®
Enables this function to boost CPU performance automatically above
rated specifications when system request the highest performance
state.
Disables this function.
This setting will be configured automatically by BIOS.
All CPU cores would be increased to maximum turbo ratio.
Disables this function.
SpeedStep Technology.
®

Advertisement

Table of Contents
loading

Table of Contents