Table of Contents
Advertisement
To clear a set password, press Enter when you are prompted to enter a new password.
A message will confirm the password is being disabled. Once the password is disabled,
you can enter the setup and OS without authorization.
Trusted Computing
f
Sets TPM (Trusted Platform Module) function.
fSecurity Device Support [Enabled]
Enables or disables the TPM function to build the endorsement key for accessing
the system.
fDevice select [Auto]
Selects TPM 1.2 or TPM 2.0 for installed discrete TPM device. If set to Auto, BIOS
will detect it automatically.
Chassis Intrusion Configuration
f
Press Enter to enter the sub-menu.
fChassis Intrusion [Disabled]
Enables or disables recording messages when the chassis is opened. This function
is ready for the chassis equips a chassis intrusion switch.
[Enabled]
[Reset]
[Disabled]
Save & Exit
Discard Changes and Exit
f
Exit BIOS setup without saving any change.
Save Changes and Reboot
f
Save all changes and reboot the system.
Save Changes
f
Save current changes.
Discard Changes
f
Discard all changes and restore to the previous values.
Restore Defaults
f
Restore or load all default values.
Boot Override
f
The installed bootable devices will appear on this menu, you can select one of them to
be the boot device.
50
BIOS Setup
Once the chassis is opened, the system will record and issue a
warning message.
Clear the warning message. After clearing the message, please
return to Enabled or Disabled.
Disables this funcion.
Advertisement
Table of Contents
