Iwoofer-App Quick Start - Velodyne VI-Q Manual

IWOOFER-APP QUICK START

Note
All screenshots shown are from the iOS version of the app. The apperance and features of the
Android version of the app may differ!
1. Navigate to the App Store of your smart device and search
for and install the app „iWoofer" or „iWoofer Pro" by Artern
Khlyupin.
2. As long as your VI-Q subwoofer is powered and your smart
device's Bluetooth is turned on, you will see a seemingly
random string of letters and numbers when you open the app,
which is best renamed in the app's options menu. Select this
device. lf you have multiple VI-Q subwoofers, they will all
show up here.
18
troubleshooting: lf the subwoofer is not receiving an input signal, it will go into
standby mode after a while and will not show up on this screen. lf this is the case for
you, either unplug the subwoofer and plug it back in, or input an input signal to bring
it out of standby. lf this doesn't work, make sure no other smart device is connected
to the subwoofer via the iWoofer-App. Otherwise, try using a different smartphone
or tablet.
3. After connecting to the VI-Q subwoofer hardware, you should see the app
harne screen as below (room correction is not available if you are not using the
Pro-App).
MANUAL VI-Q WWW.VELODYNEACOUSTICS.COM