Led Display; Led1; Led2 - Shimano SW-EN600-L User Manual

LED display

LED1

LED display
LED1
Displays the level of the battery mounted on the bicycle.
* This battery level display uses zero to indicate a battery level where assistance can no longer be performed.
SHIMANO STEPS provides an amount of battery separate from the assist function for additional equipment such
as lights and ABS. Therefore, the battery level may differ from that which can be checked with the battery LED.
Display
Green
Red
Flashing red

LED2

Mainly used to display the current assist mode. The assist mode returns to OFF when the power is turned OFF.
* Refer to the "SHIMANO STEPS User's Manual" for details on the assist mode and walk assist mode operations.
Display
OFF
Light blue
Green
Yellow
Flashing yellow
Blue
Flashing blue
Flashing red
The assist mode is OFF.
The assist mode with the lowest level of assistance.
(Push the Y button to turn LED2 OFF and disable the assist mode.)
The assist mode with an intermediate level of assistance.
The assist mode with the highest level of assistance.
(Pressing the X button does not make the level of assistance any higher than this.)
Indicates the adjustment mode.
In this state, gear shifting operations cannot be performed with the switch unit (right).
The assist mode is set to the walk assist mode.
Assistance is functioning in the walk assist mode.
Refer to "Error indication."
Battery level
100 - 21%
20 - 11%
10% or less
State
9