Notice - Shimano SW-EN600-L User Manual

Notice

Notice
Do not keep connecting and disconnecting the small waterproof connector. Doing so may impair the
waterproofing.
The components are designed to be fully waterproofed to withstand wet weather riding conditions; however,
do not deliberately place them into water.
Do not clean the bicycle in a high-pressure wash. If water gets into any of the components, operating
problems or rusting may result.
Handle the components carefully, and avoid subjecting them to strong shock.
Be sure to attach dummy plugs to any unused E-TUBE ports.
Do not allow water to get into the E-TUBE ports.
Do not use thinner or other solvents to clean the products. Such solvents may damage the surface.
Do not turn the bicycle upside down. There is a risk of damage to the switch unit.
Products are not guaranteed against natural wear and deterioration from normal use and aging.
For connectable SHIMANO STEPS components and shifting units, check the compatibility information on the
SHIMANO product website (
SHIMANO STEPS user's manuals are split among several booklets. Please view the "SHIMANO STEPS User's
Manual", "SHIMANO STEPS Special Battery and Parts User's Manual", and "SHIMANO STEPS Cycle Computer
User's Manual" as well, according to the components you are using.
The open source software used in this product is available at the following URL:
https://si.shimano.com/compliance/oss
For maximum performance we highly recommend SHIMANO lubricants and maintenance products.
https://productinfo.shimano.com/#/com ).
5