Underside; Front With The Display Open - Toshiba PORTEGE Z30-E User Manual

Carefully clean the dust on the cooling vents' surface using a soft cloth.

Underside

The following figure shows the underside of the computer. Ensure that the
display is closed before the computer is turned over to avoid causing any
damage.
1. Cooling vents
* Provided with some models.
Product appearance depends on the model you purchased.
Cooling vents
Docking port

Front with the display open

This section shows the computer with the display panel open. To open the
display, lift up the display panel and position it at a comfortable viewing
angle for you.
User's Manual
Figure 3-5 The underside of the computer
1
Only the TOSHIBA Hi-Speed Port Replicator III 180W or 120W is
compatible with the docking port.
Do not attempt to use any other Port Replicator.
Keep foreign objects out of the docking port. A pin or similar object
can damage the circuitry of the computer.
1
2. Docking port*
The cooling vents help the processor to avoid
overheating.
This port enables connection of an optional Hi-
Speed Port Replicator III 180W/120W described
in TOSHIBA Hi-Speed Port Replicator III 180W/
120W.
Some models are equipped with the docking
port.
2
3-6