Figure 25. Remove the USB board and bracket
Remove the system board
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the battery pack" on page 31
"Remove the Wi-Fi card" on page 32
"Remove the heat sink and fan assembly" on page 34
"Remove the M.2 solid-state drive" on page 35
Step 1.
Detach the 8 connectors from the system board as follows:
• transform board connector
• fingerprint cable connector
• keyboard cable connector
• back-light cable connector
• touchpad cable connector
• FCC cable connector
• USB board connector
• EDP cable connector
42
Hardware Maintenance Manual