Sangean HDR-1 User Manual page 19

Turning Alarms On/Off & Setting
This unit features a dual alarm system that can sound either to a
beeping tone or AM/FM or Auxiliary Audio. The easiest way to set
the alarms is when the unit is off, and these instructions are designed
using this option.
Using the Remote:
1. Press and hold "ATS/Setup" button to activate menu.
2. Continue to press "ATS" button or "Tune" Up/Down button to reach
desired alarm (Alarm-1 or Alarm-2).
3. Press "Enter" to select.
4. Press "Tune" Up/Down button to set the desired alarm setting
(Beep, AM, FM, Auxiliary, OFF).
5. If turning the alarm off, then press "Enter" button to save. Any other
setting, continue to next step.
6. Set appropriate time. Hour first, then Minutes, AM/PM then to
frequency options (Daily, Weekdays, Once, Weekends.)
7. Press "Enter" to save selections and proceed to next step.
8. If using Beep Function proceed to step 13.
9. If using AM set the appropriate frequency and continue to step 12.
10. If using FM, set the appropriate frequency and multicast channel
and continue to step 12.
11. If using Auxiliary continue to next step.
12. Set desired volume level.
13. Press "Enter" to save settings.
21
20070524_HDR-1_381QB0SB-A_GB.p65
2007/5/24, ¤U¤È 03:20
18