Wall Mounting
Refer to the table below for the standard dimensions for wall mount kits.
Maximum
Hole pattern
Interface Pad
Pad
Screw Specification &
Loading
(W x H)
(W x H x D)
Hole
Quantity
M4 x 8mm
14kg
100 x 100 mm 115 x 115 x 2.6 mm Ø 5mm
4 pieces
NTTE: Wall mount kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Remove the monitor stand's base by unscrewing the three (3) screws from the
monitor stand's neck.
11