Wall Mounting - ViewSonic VS19573 User Manual

Wall Mounting

Refer to the table below for the standard dimensions for wall mount kits.
NOTE: For use only with a UL certified wall mount kit/bracket. To obtain a wall-
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum Hole pattern
Loading (W x H)
14 kg 100 x 100 mm
NOTE: Wall mount kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Unscrew the attached stand and carefully remove it (if applicable).
4. Attach the mounting bracket to the VESA mounting holes at the rear of the
monitor. Then secure it with four (4) screws (M4 x 10 mm).
5. Follow the instructions that come with the wall mounting kit to mount the
monitor onto the wall.
Interface Pad
(W x H x D)
115 x 115 x 2.6 mm
100 mm
12
Screw
Pad Hole
Specification
Ø 5 mm M4 x 10 mm
Quantity
4 screws