Reset; Connecting To Your Computer - SanDisk Sansa Sansa Clip+ 4GB User Manual

Reset

®
If the Sansa
and hold it for approximately 15 seconds. This is similar a power down of the player.
However, be aware that once you perform the reset, any adjustments you made
during the last operation will be lost.

Connecting to your Computer

To connect the Sansa
1. Connect the larger end of the USB cable into an available USB port on the PC.
2. Connect the smaller end of the USB cable into the dock connector of the player.
3. The player will show "Connected" on its display screen.
4. The player will appear in My Computer as Sansa Clip+. (In Mac OS, the player will
appear on your desktop as a removable disk named SANSA CLIPP.)
NOTE: For Mac OS, the Clip+ player must be set to Auto Detect or MSC mode in the
USB Mode settings. See Section 9 – Settings for more details.
Auto Detect or MTP mode
Basic Usage
Clip+ MP3 player freezes up for any reasons, press the Power button
®
player to your PC, follow these instructions:
8