Chapter 3; Basic Operation; Power/Select Button; Power On - SanDisk CLIP VOICE User Manual

CHAPTER 3

This chapter describes basic user operation instructions for the
SanDisk Clip Voice.

Basic Operation

Power/Select Button

The Power button is located in the center of the player. It can be used to turn the player on
or off, and also to select player options.

Power On

Press and hold the Power button for three seconds to turn on the player. The last played
function screen from the Main Menu will appear after the device has been powered on.

Power Off

Press and hold the Power button for three seconds to turn off the player.

Locking the device

Press and hold the Back button for approximately 3 seconds.

Unlocking the device

With the device in locked mode, press and hold the Back button for approximately 3 seconds.

Reset

If the player freezes for any reason, power off the player and then restart it again. After you
perform the reset, any adjustments made during the last operation will be lost. Your saved
content (e.g. Music Files, Audiobooks, etc.) will not be deleted from the player.
14
Basic Usage