Timer Function; Cancelling The Timer - Samsung MM-ZL7 Instruction Manual

Timer Function

The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current
time is correct.
For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
1
Switch the system on by pressing On/Standby.
2
Press Timer/Clock until
3
Press Program/Set.
Result: ON TIME is displayed (instead of the equalizer
symbols) for a few seconds, followed by any
switch-on time already set; you can set the timer
switch-on time.
4
Set the timer switch-on time.
a
Set the hour by pressing Tuning
b
Press Program/Set.
Result: The minutes flash.
c
Set the minutes by pressing Tuning
d
Press Program/Set.
Result: OFF TIME is displayed (instead of the equalizer
symbols) for a few seconds, followed by any
switch-off time already set; you can now set the
timer switch-off time.
5
Set the timer switch-off time.
a
Set the hour by pressing Tuning
b
Press Program/Set.
Result: The minutes flash.
c
Set the minutes by pressing Tuning
d
Press Program/Set.
Result: VOL XX is displayed, where XX corresponds to
the volume already set.
õ ö
6
Press Tuning and
Program/Set.
Result: The source to be selected is displayed.
õ ö
7
Press Tuning and
when the system switches on.
If you select...
TAPE (cassette)
TUNER (radio)
CD (compact disc)
8
Press On/Standby to set the system to standby mode.
Result: is displayed to the bottom left of the time, indicating
that the timer has been set. The system will switch on
and off automatically at the required times.
If the timer switch on and off times are identical, the word
ERROR is displayed.
TIMER is displayed.
õ ö
and .
õ ö
and .
õ ö
and .
õ ö
and .
to adjust the volume level and press
to select the source to be played
You must also...
Insert a recorded cassette in one of
the decks before setting the system
to standby.
a Press Program/Set.
b Select a preset station by pressing
õ ö
Tuning and .
a Load a compact disc.
On/Standby
1 8
Power Preset
Sound EQ
Tape
Mono/ST.
Mode
3 4
CD/TAPE/MP3
Band
4 5 6 7

Cancelling the Timer

After having set the timer, it will start automatically as shown by
the indication on the display. If you no longer wish to use the
timer, you must cancel it.
You can stop the timer at any time (system on or in standby
mode).
To... Press Timer On/Off...
Cancel the timer Once.
Result:
Restart the timer Twice.
Result:
On/Standby
Power Preset
Sound EQ
Tape
Mono/ST.
Mode
CD/TAPE/MP3
Sleep Mute
Timer Timer/
2
on/off Clock
Program/
Repeat
Set
5 6 7
Last Memory
Function
VOL.
4 5 6 7
Tuning
Mode
Track/
Album
VOL.
is no longer displayed.
is displayed again.
Sleep Mute
Timer Timer/
on/off Clock
Program/
Repeat
Set
Last Memory
19
GB