In The Event Of Scale Deposits; Removing/Replacing The Pourer Sieve; Storage - Silvercrest 89367 Operating Instructions Manual

In the event of scale deposits:

GB

Removing/replacing the pourer sieve

Storage

18
Scale deposits on the bottom of the appliance lead to increased energy con-
sumption and reduce the service life of the appliance.
Descale the appliance as soon as scale deposits become apparent.
Before descaling, remove the pourer sieve 6 (see chapter "Removing/
■
replacing the pourer sieve").
■ Use a descaler designed for household appliances (e.g. for coff ee machines).
Proceed as detailed in the instructions provided for the use of the decalcifying
agent.
■ After descaling, rinse the appliance with lots of clean water.
1) Open the lid.
2) Pull the pourer sieve 6 upwards out of its holder.
3) Clean the pourer sieve 6 with a lightly moistened dishcloth and under running
water.
4) After cleaning it, replace the pourer sieve 6. Ensure that the restraint
engage and that the pourer sieve 6 is fi rmly seated.
NOTICE
Should the scale deposits in the pourer sieve 6 be fi rmly established, lay
►
it in a water-vinegar solution having a ratio of 6:1 for a few hours. The
scale deposits will dissolve themselves. Rinse the pourer sieve 6 with lots
of clear water.
■ Allow the appliance to cool down completely before putting it into storage.
Wind the power cable around the cable winder 4 under the base 3.
■
■ Store the appliance at a dry location.
SWKCD 3000 A1