Samsung Z-99Q Owner's Instructions Manual page 12

Z-99Q-1 5/13/03 13:48
SLOW MOTION
Press the SLOW button on the remote control
when the play function is on.
-Voices do not come out when the
SLOW MOTION button is pressed
-Slow playing is 1/2 of the normal
playing speed at 1st press.
-Slow playing is 1/4 of the normal
playing speed at 2nd press.
-Slow playing is 1/8 of the normal playing speed at 3rd
press.
-Slow playing is canceled at 4th press.
-The sound is muted during the slow playing.
To return to normal operation
-Press the SELECT(PLAY/PAUSE) button.
NTSC/PAL SELECTION METHOD
- Press the PAL/NTSC(REPEAT) button
for 1 sec or longer.
You can matching the picture display
on your TV.
DISC CHANGE FUNCTION
To replace disc during the play
•
Press the RETURN(STOP) button.
•
Eject the tray by pressing the OPEN/CLOSE button.
•
Press the DISC CHANGE button to rotate the tray.
STOP
To load additional disc
•
Eject the tray by pressing the OPEN/CLOSE button. It plays
continuesly even though the tray is ejected.
•
When the tray is ejected while playing a disc, the tray does
not rotate. Therefore, only up to two discs can be loaded.
OPEN/CLOSE
Page 11
SLOW
SELECT
REPEAT
PAL/NTSC
OPEN/CLOSE
DISC CHANGE
SELECT SOUND TO YOUR PREFERENCE
PREPARATION
1. Press the POWER button.
(The audio is set to the stereo mode
automatically)
2. Insert a disc and press the PLAY button.
1
Press the SOUND SELECTOR button
- Every time you press this button, sound changes
as show below
(REMOTE CONTROL)
Screen on your
TV monitor
1st press. L-CH
R-CH
2nd press.
3rd press.
STEREO
2
Press the SOUND SELECTOR button.
- Each time the sound button is pressed for 1 sec or
longer, the mode changes as follows.
1st press.
(for 1 sec or longer)
2nd press.
(for 1 sec or longer)
3rd press.
(for 1 sec or longer)
SOUND
Audio Output
L-ch R-ch
L-signal L-signal
R-signal R-signal
L-signal R-signal
TV monitor
3 D
LIVE
THEATER
11