MCD-HM920(GB)
6/27/03 14:25
Page 27
Program function
You can store up to 30 tracks of your favorite tunes.
Example: When storing track number 4 to program number 1.
1
In the stop mode, press the
NAVI/PROG button on the
remote control.
• When playing an MP3(WMA)-CD,
press and hold the NAVI/PROG
button in the stop mode.
2
ïI
Using
or
button,
Iî
select the desired track.
3
Press the NAVI/PROG on the
remote control.
• Track number 4 is stored under
program number 1 and you will
be taken to program number 2.
• Continue to program the desired
tracks.
4
Press the Play/Pause ( √» )
button when programming
is complete.
To stop program playback
• Press the STOP ( ) button.
• The total number of programmed tracks as well as the total number of tracks in a given
27
disk will be shown on the display.
• Press the Play/Pause ( √» ) button to resume program playback.
normal
esp Flat
NAVI/PROG
P : 01 Tr : - - -
normal
esp Flat
P : 01 Tr : 004
normal
esp Flat
NAVI/PROG
P : 02 Tr : 006
normal
esp Flat
P01
04
00 : 52
CDDA Disc
To confirm the program
•
In the stop mode, press the
NAVI/PROG button.
Each time the button is pressed, track
•
numbers will be shown on the display
according to their program sequence.
To change the program
•
To change the programmed tracks during program
confirmation, use
or
ïI
to select the track to
Iî
change.
Press the NAVI/PROG button to add new tracks.
•
To cancel the program mode
•
Press the STOP ( ) button twice.
The Program mode will also be canceled if the
•
lid opens during programming.
Warning
•
During programming, if no action is performed for about 15
seconds, the player will automatically turn itself off to conserve
battery power consumption.
NAVI/PROG
normal
esp Flat
P : 01 Tr : 004
NAVI/PROG
28