Blackweb BWA19AAS91 - Bluetooth Speaker Manual

Blackweb BWA19AAS91 - Bluetooth Speaker Manual

Also See for BWA19AAS91:

Advertisement

Blackweb BWA19AAS91 - Bluetooth Speaker Manual

DEVICE OVERVIEW

DEVICE OVERVIEW

POWER:
Press and hold the power button for 2 seconds to turn device on or off.

VOLUME UP +:
Short press (< 0.5s) the Volume Up button to turn up volume.
Press and hold the Volume Up button (2s) to go to the next track.

VOLUME DOWN –:
Short press (< 0.5s) the Volume Down button to turn down volume. Press and hold the Volume Down button (2s) to go to the previous track.

INDICATOR LIGHT STATUS:
Power on – When the speaker is turned on, a solid blue light will appear momentarily.
Bluetooth pairing indicator – When the speaker is turned on, a flashing blue light indicates the speaker is ready to pair. Once paired, the light will begin blinking every 5 seconds.
Power off – When the speaker is turned off, the indicator light will turn off.
Battery charging – While speaker is charging, the indicator light will turn solid red. Once the speaker is fully charged, the light will turn off.

SPEAKER PAIRING

To pair the speaker:

  1. Make sure the smartphone, tablet, or computer you're using with the speaker has Bluetooth.
  2. Turn on the speaker (press and hold the power button for 2 seconds) and look for the small blinking light.
  3. Find the BW COLOR SPK M speaker in your device's Bluetooth list, and select.

The device and Bluetooth will find each other every time, so long as the speaker is set to Bluetooth and your device's Bluetooth is on.

Auto-off: If the speaker is on but is not connected to Bluetooth, it will shut down after 2 minutes. Once paired, the speaker will automatically shut down if paused for 15 minutes or more.

DISCONNECTING DEVICE

Press the button for up to 2 seconds to disconnect the speaker from the device and enter into pairing mode.

LIGHT PROGRAMS

Press the button to cycle through the light programs

Program 1: Slow fade color transition
Program 2: Fast color change
Program 3: Color select. Stops on the current color
Program 4: Move to the beat
Program 5: Candle flicker
Program 6: Color movement
Program 7: No lights

LIGHT PROGRAMS

AUX-IN MODE:
Plug one end of the cord into the speaker and the other into the headphone jack on your device. Press play. (NOTE: The speaker must be on in order to play.)

USB CABLE:
25 cm micro-USB cable.

CALL HANDLING

INCOMING CALL:
Answering and ending a call – When speaker is paired to your phone, press the play/paus button to answer the call. To end a call, press the play/pause button.

Move call from speaker to device – If you are on the call and wish to move the call from th speaker to your device, press the play/pause button (2s).

Reject an incoming call – To reject an incoming call, press the play/pause button (2s)

Situation Press play/pause button Press play/pause button (2s)
First incoming call Answer call Reject call
On call End call Move call from speaker to device

SPLASH PROOF (IPX4 RATING)

IPX4 rating means this speaker is splash proof. Water being splashed on the speaker from any direction will not cause any harm to the speaker or affect its performance.

CLEANING

Use a soft, dry towel to clean the speaker. Using harsh cleaners or anything else may cause harm to the mechanics inside. Remember to keep the charging and aux flap flush with the speaker for the best protection.

Walmart.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Blackweb BWA19AAS91 - Bluetooth Speaker Manual

Advertisement

Need help?

Need help?

Do you have a question about the BWA19AAS91 and is the answer not in the manual?

Questions and answers

Table of Contents