Press and hold the PLAY/PAUSE button for 3 seconds to turn device ON/OFF.
VOLUME UP " + ":
Short press (< 0.5s) the button to turn up volume. Press and hold the button (3s) to go to
the next track.
VOLUME DOWN " – ":
Short press (< 0.5s) the button to turn down volume. Press and hold (3s) the button to go
to the previous track.
INDICATOR LIGHT STATUS:
Power ON – When the speaker is turned on, a solid blue light will appear momentarily.
Bluetooth pairing indicator – When the speaker is turned on, a flashing blue and
red light indicates speaker is ready to pair. Once paired, the light will turn solid blue, then
Power OFF – When the speaker is turned off, the indicator light will momentarily turn
solid blue, then turn off.
Battery charging – While speaker is charging, the indicator light will turn solid red.
Once speaker is fully charged, it will turn off.
To pair the speaker, follow these simple steps:
1. Make sure the smartphone, tablet, or computer you're using with the speaker has
2. Turn on the speaker (press and hold the PLAY/PAUSE button for 3 seconds) and look for
the little blinking light.
3. Look for Blackweb SPRK A010 in your device' s Bluetooth list, or click YES.
The device and Bluetooth will find each other every time, so long as the speaker is set
to Bluetooth and your device's Bluetooth is on. If you're connecting to a computer,
you may have some extra steps on that end. You'll have to get that information from the
Auto off: If the speaker is on but is not connected to Bluetooth, it will shut down after 2
minutes. Once paired, if the speaker is paused for 15 minutes or more, it will automatically
SPEAKER CONTROLS & FEATURES
Bluetooth Status Light
Volume UP /
Next Track (3s)
Volume DOWN /
Line In Port
Previous Track (3s)
Long press "+" and "–" buttons at the same time for up to 4 seconds to disconnect the
speaker from the device and enter into Pairing mode.
Answering and hanging up a call – When speaker is paired to your phone, short
press the PLAY/PAUSE button to answer the call. To hang up, short press the PLAY/PAUSE
Move call from speaker to device – If you are on the call and wish to move the call
from the speaker to your device, long press the PLAY/PAUSE button.
Reject an incoming call – To reject an incoming call, long press the PLAY/PAUSE
button for 3 seconds.
See below table for clarification.
First incoming call
25 cm Micro USB cable.
Pick up call
Move call from speaker to device