Advertisement
Table of Contents
- 1 Unpack the Machine and Check the Components
- 2 Remove the Packing Materials and Re-Install the Toner Cartridge and Drum Unit Assembly
- 3 Load Paper in the Paper Tray
- 4 Connect the Power Cord and Turn the Machine on
- 5 Connect the Telephone Line Cord (for MFC Models)
- 6 Connect Your Computer or Mobile Device to Your Machine
- 7 Manual Wireless Setup (Wireless Models)
- Download this manual
CHN-ENG
Version 0
EN
Unpack the machine and check the components
Toner Cartridge and Drum Unit
1
Remove the packing materials and re-install the toner cartridge and drum unit assembly
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
Quick Setup Guide
DCP-L5518DN / MFC-L5718DN / MFC-L5728DW
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Operation Videos:
www.95105369.com
Assembly
(Installed in the machine)
Quick Setup Guide
Discard the
silica gel pack.
Adjust the paper
guides.
Front
Installation & Using Videos
NOTE:
• The available connection interfaces vary depending on the model.
You must purchase the correct interface cable if you require one.
AC Power Cord
USB Interface Cable
• The screens and images in this Quick Setup Guide show the
MFC-L5728DW.
Product Safety Guide
Do not exceed this mark.
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 2 metres long.
• Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
(Network cable is not a standard accessory.)
Remove the orange part.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Brother DCP-L5518DN
Summary of Contents for Brother DCP-L5518DN
- Page 1 Quick Setup Guide CHN-ENG Version 0 DCP-L5518DN / MFC-L5718DN / MFC-L5728DW Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure. Operation Videos: Installation & Using Videos www.95105369.com Unpack the machine and check the components NOTE: • The available connection interfaces vary depending on the model.
- Page 2 When the wireless setup is successful, the touchscreen displays [Connected]. Go to to install software. SSID: XXXXXXX Network Key: XXXX If setup is not successful, restart your Brother machine and your wireless access point/router, and repeat If still not successful, visit If you cannot find this information, ask your network www.95105369.com. administrator or wireless access point/router manufacturer. For detailed machine information and product specifications, see the Online User's Guide at www.95105369.com.
Need help?
Do you have a question about the DCP-L5518DN and is the answer not in the manual?
Questions and answers