Advertisement
To pair the robotic lawn mower and the app
The Automower® Connect app is a free app for your mobile device.
The app is used for the settings and operation of the robotic lawn mower.
1.
Download the Automower® Connect app from App Store or Google Play.
2.
Sign up and specify an e-mail address and a password to create a Husqvarna
account.
3.
Log in to your Husqvarna account in the app.
4.
Set the product to ON.
NOTE: The Bluetooth® pairing mode is active for 3 minutes.
5.
Select My mowers in the Automower® Connect app, and then select the plus sign (+).
6.
Follow the instructions in the app.
If the robotic lawn mower is connected to your Wi-Fi network you can control it with the
Automower® Connect app from everywhere. With Bluetooth® connection you can control
the robotic lawn mower within short range up to 30 m.
LED status indicator on the keypad
The LED status indicator lamps on the keypad shows the status of the
robotic lawn mower. The buttons on the keypad with flashing lights are the
available operating modes for the robotic lawn mower that you can select.
You must enter the PIN code before you can select an operating mode.
If the robotic lawn mower is parked, push the
lawn mower is set to idle mode where you can set an operating mode.
Standby
Idle
App Store and Apple logo are trademarks of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
Automower® is a registered trademark of Husqvarna AB.
Copyright © 2023 Husqvarna AB (publ). All rights reserved.
STOP
button and the robotic
Waiting for PIN code
Cutting to the set
Cutting Secondary area
Schedule or
Override Schedule
Parked
Firmware installation
in progress
1143070-26
2023-04-27
Firmware error
Error
Charging
husqvarna.com
Advertisement
