Table of Contents
Advertisement
Taking pictures by setting the aperture value and
shutter speed
Recording mode:
●
The effect of the aperture value and shutter speed you have set is not applied to the recording
screen. To check the effect on the recording screen, use Preview Mode.
●
The brightness of the screen may vary from the actual pictures recorded. Check the brightness of
pictures using the playback screen.
●
When you adjust the aperture value and shutter speed, an exposure metre is displayed. If
aperture and shutter speed are shown in red, you do not have appropriate exposure.
●
If the correct exposure is not achieved when you press the shutter button halfway, the numeric
values of the aperture and shutter speed are displayed in flashing red.
Taking pictures by setting the aperture value
(Aperture-Priority AE Mode)
When you set the aperture value, the camera automatically optimises the shutter speed
for the brightness of the subject.
1
Set mode dial to [
2
Rotate the control dial to set the aperture value
• The operation can also be performed by rotating the control ring.
Aperture value
Exposure metre
Aperture values
that can be set
F3.3 - F8.0
*
1
You may not be able to select some values depending on zoom
position.
*
2
Varies depending on the setting of ISO sensitivity.
68
]
Shutter speed set (seconds)
*
1
*
4
2
- 1/2000
(When the mechanical shutter is used)
*
1
2
- 1/16000
(When the electronic shutter is used)
Recording mode
(→71)
250
125
60
30
15
4.0
5.6
8.0
Advertisement
Table of Contents
