Sending Pictures - Panasonic Lumix DC-TZ96D Operating Instructions For Advanced Features

Sending pictures

When sending pictures, first select [New Connection], then select the method of sending
pictures.
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] →
[New Connection] → [Send Images While Recording] /
[Send Images Stored in the Camera]
■
Images that can be sent
Destination
[Smartphone]
[PC]
[AV device]
*
1
[Printer]
*
1
Sending by [Send Images While Recording] is not available.
*
2
Files larger than 4 GB cannot be sent.
*
3
An Android 7.0 or higher or iOS 10.0 or higher operating system is required.
*
4
Excluding 4K motion pictures.
• Some images may not be played back or sent depending on the device.
• For more information about picture playback, see the operating instructions of the
destination device.
[Send Images While Recording]
A picture can be automatically sent to a specified device every time you take it.
• [ ] is displayed on the recording screen while connected by
[Send Images While Recording], and [
files are being sent.
• To terminate the connection, follow the steps below:
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [Yes]
• You cannot change the settings while sending a still picture.
252
JPEG RAW
MP4
*
3
○ ○
○ ○
○ –
○ –
] is displayed while
* * *
1 1, 2
AVCHD
*
4
○ –
○ ○
– –
– –
Wi-Fi/Bluetooth
*
1
4K Burst File
Pictures recorded in
*
1
[Post Focus]
–
○
–
–
1 1