Advertisement
9
Installing your new appliance
Before using the appliance for the first
time, you should be informed of the
following tips.
Ventilation of appliance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat. For
this reason, sufficient clear space should
be available around the refrigerator.
Suggest: Itisadvisable for there to be
50-70mmofspace from the backto the
wall,atleast100mm fromitstop,atleast
100mmfrom its side to the wall and a
clear space upfrontto allow the doorsto
open 115°.Asshown in follow。
115
831
Note:
This appliance is intended to operate
●
in the climate class from 55~110°F. It
may not work properly if being left at a
temperature above or below the
indicated range for a long period.
Install your appliance in a dry place to
●
avoid high moisture.
Keep the appliance out of direct
●
sunlight, rain or frost. Place the
appliance away from heat sources
such as stoves, fires or heaters.
Leveling of appliance
For sufficient leveling and air
●
circulating in the lower rear section of
the appliance, the bottom feet may need
to be adjusted. You can adjust
them manually by hand or by using a
suitable spanner.
To allow the doors to self-close, tilt the
●
top backwardsby about 10mm .
Advertisement
