4. TV with coax input.
Basic Setup 1-
12
If you have an older TV which has only a coax connector, you will need to purchase an RF
modulator and coax cable to supply the S-vIdeo and A/V connections. RF modulators are available
at most electronics retailers. Connect it as shown below.
1. Connect the coax cable between the TV and the RF modulator.
2. Plug the A/V (and S-video) cables into the MovieBeam receiver and RF modulator as shown
below. (Using the S-video cable is recommended.)
TV
MovieBeam
receiver
RF Modulator
IN
COAX
S-VIDEO
R AUDIO L
VIDEO
COAX
OUT
Setup 1-12