Table of Contents
Advertisement
DESCRIPTION
Setting Up TV Operations with the Remote Control
Enter the manufacturer number into the remote control to control the TV with the remote control
(see "Available TV Manufacturer Numbers" on pages 40~45).
1. Turn the TV on.
2. Point the remote control towards the TV.
3. Enter the TV manufacturer number by using the NUMERICAL keys while pressing the TV key.
E.g. For a Samsung TV, press 0, 0 and 1 in this order by using the NUMERICAL keys while
pressing the TV key.
4. When the TV is turned off or on, the configuration is finished.
TV functions that you can control with the remote control
Button key
Function
TV STANDBY/ON
Press to turn the TV on or off.
Press to select an external input source for the TV.
TV IN SEL
Press to adjust the TV volume / Exclusive to the TV
VOL+/-
Press to select a TV channel.
CH
/
MUTE
Press to mute the TV sound.
N N o o t t e e
: 1. There is a model that can only be turned on by pressing the numeric key '0' on
the remote control.
2. TV models of other manufacturer that can be controlled with the remote control
are limited, and some functions may not work.
3. If you replace the remote control batteries or enter a new manufacturer number,
the previously configured TV manufacturer number is deleted.
4. When a connected device is an integrated TV model (VCR, DVDP), take care
when using the remote control because it may operate both of them
simultaneously.
5. If the configuration number does not work, try another number.
ENG-14
D
I
G
I
T
A
L
T
E
R
R
E
S
T
R
CONNECTING YOUR STB
Location of the receiver
Your STB should be placed under proper ventilation.
Don't put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating.
The location should be safeguarded from direct sunlight, excess moisture, rough handling or
household pets.
Avoid stacking other electronic components on the top of the receiver.
The location should be safely accessible by the cable from your antenna system.
Connecting the receiver with aerials
You can connect the receiver to the following type of aerials:
●
Use a standard outdoor roof aerial intended for
receiving channels between VHF and UHF.
●
Because many older roof-mounted aerials may only
receive a limited number of channels, it is difficult or
impossible to receive digital channels transmitted on
higher frequencies. If so, you may replace the roof
aerial.
●
Some outdoor aerials are directed towards an
analogue transmitter.
The aerial must be directed towards a digital TV
transmitter.
●
It is not desirable to use indoor or window mounted
aerials, as it will be difficult or impossible to receive
digital channels.
N N o o t t e e
: In some region, the digital terrestrial signal
may be weak.
In order to receive channels with a weak
signal, a booster may need to be installed
into your antenna system.
I
A
L
H
D
T
V
R
E
C
E
I
V
E
R
ENG-15
Advertisement
Table of Contents
